Colorado Springs sign company & vehicle wrap company
Mon-Fri 8:30-5:00 · By Appointment Only (719) 661-4470
APG: Advanced Printing and Graphics, Colorado Springs sign company
Decision Guide Published November 4, 2026 · 6 min read

Illuminated vs Non-Illuminated Signs: Which Do You Need?

A practical way to decide whether your building sign should be lit, based on when customers find you, how fast they are driving, what the lot looks like at night, and what each option costs to build, permit, and run.

$8-15KTypical illuminated commercial sign
$2.5-10KTypical non-illuminated sign
4-8 wkIlluminated sign timeline
1-2 wkNon-illuminated sign timeline
Quick Answer

The choice between illuminated vs non-illuminated signs comes down to when customers look for you. If you are open after dark, face a busy road, or get most traffic in winter evenings, an illuminated sign usually earns its cost. If you close by 5:00, sit in an office park, or rely on appointments, non-illuminated dimensional letters often do the job. APG's published typical ranges are $8,000 to $15,000 for illuminated commercial signs and $2,500 to $10,000 for non-illuminated ones. Lit signs also add electrical work by a licensed contractor and a longer timeline, typically four to eight weeks. These ranges are typical and are not project specific estimates.

A lit sign works an extra shift. Whether you need that shift depends on when your customers are looking.

In Colorado Springs, the sun sets before 5:00 pm for a good part of December, so a sign that is invisible after dark spends a lot of the winter workday invisible. For some businesses that matters a great deal. For others, it barely matters at all.

This guide compares lit and unlit building signs on the factors that decide the question: hours, road speed, nighttime lighting, cost, permits and electrical, energy use, and maintenance. For the products themselves, see our pages on channel letter signs and dimensional letters.

01/9Section

The quick comparison

FactorIlluminatedNon-illuminated
Typical cost$8,000 to $15,000$2,500 to $10,000
Typical timeline4 to 8 weeks1 to 2 weeks
Night visibilityReadable after darkDepends on nearby lighting
PermitsSign plan plus electrical workSign plan, no electrical
Ongoing costElectricity, LED and power supply serviceOccasional cleaning
Common productsChannel letters, halo-lit letters, lit push-through panelsDimensional letters, flat cut letters, aluminum panels

These ranges are typical and are not project specific estimates. The rest of this guide explains when each column wins.

02/9Section

Start with your hours

If customers look for you after dark, light the sign. That includes restaurants, retail open into the evening, gyms, urgent care, and any business that runs winter hours past sunset.

If you are open Monday through Friday during business hours, the case is weaker. An office, clinic, or professional firm that closes at 5:00 still loses some winter daylight, but most of its visitors arrive with an appointment and an address. A clean non-illuminated sign confirms they found the right building, and that is its main job.

A middle case: businesses that want the building to read as established and open at night, even when closed. A lit sign on a timer can carry that message for a few hours after close.

03/9Section

Road speed and setback

Faster roads and deeper setbacks favor illumination. A driver on Powers Boulevard or Academy Boulevard has a few seconds to spot and read a sign, and at dusk or at night, contrast is what makes that possible.

On slower streets, in walkable districts, or where the sign faces a parking lot people have already entered, non-illuminated letters with strong color contrast are often enough. Letter height, contrast, and placement matter more than lighting for daytime legibility. Our guide to channel letter sign costs includes a letter height and readability table.

04/9Section

What the site looks like at night

Visit the building after dark before you decide. Some facades are lit by parking lot poles, wall packs, or neighboring signs, and a non-illuminated sign may read fine there. Others go nearly black.

Two options sit between the two choices:

  • External lighting. Gooseneck or linear fixtures aimed at dimensional letters. Check that your landlord and the sign code allow it.
  • Halo-lit letters. Opaque letters with LEDs shining back onto the wall. They read as dimensional by day and glow softly at night. Cost depends on the design, so price them against front-lit letters rather than assuming either is cheaper.

Our comparison of channel letters vs flat cut letters covers backlit flat cut letters as another middle option.

05/9Section

What each option costs, and why

Lit signs cost more because they are electrical products. The extra cost comes from:

  • Fabricated letter bodies with returns and translucent faces, instead of solid cut letters
  • LED modules, power supplies, wiring, and often a raceway
  • UL listing, since the National Electrical Code requires electric signs to be listed
  • A licensed electrician to connect power at the wall, plus the circuit itself if one is not already there
  • More fabrication time, which shows up in the four to eight week timeline

APG's published typical ranges are $8,000 to $15,000 for illuminated commercial signs and $2,500 to $10,000 for non-illuminated commercial signs. Size, letter count, materials, mounting surface, and permit work move a project within those ranges. These ranges are typical and are not project specific estimates. Our guide to storefront signage costs shows a full first-sign budget, and our guide to dimensional letter costs covers the unlit side.

06/9Section

Permits, electrical, and EMC rules

Both lit and unlit permanent building signs in Colorado Springs need a sign application. Lit signs add electrical requirements:

  • Sign plan. Under the city code, a sign plan is approved by planning staff before the building permit is issued. Our guide to Colorado Springs sign permits after Ordinance 26-01 explains the steps.
  • Licensing. The Pikes Peak Regional Building Department licenses sign contractors. A D-5A license covers all signs including electric signs, while a D-6B license excludes electric signs. Electrical work also needs a Colorado electrical contractor.
  • Electronic message centers. An EMC application needs a compliance document, and the 2026 ordinance expanded where EMCs are allowed, including industrial, office, medical, civic, and church uses, per the International Sign Association. Our LED and EMC rules guide covers hold times and brightness.
  • Temporary signs. Temporary signs in the city cannot be illuminated or animated.

Some sign projects require engineered drawings based on the sign type, size, mounting method, and site conditions. We confirm the applicable requirements as part of the project review. Our sign permit services page covers how we handle the paperwork.

07/9Section

Energy use

Modern LED signs use far less power than the neon and fluorescent signs they replaced, but they are not free to run. The math is simple: watts times hours.

As an example, a sign drawing 200 watts and running 12 hours a night uses 2.4 kilowatt-hours a day, or about 876 kilowatt-hours a year. Multiply that by your commercial electric rate to get a yearly cost. Ask your sign provider for the sign's rated wattage, which is set by the power supplies, and put the sign on a timer or photocell so it only runs when it is useful.

Non-illuminated signs use no power at all, which is one reason they make sense for daytime businesses.

08/9Section

Maintenance and lifespan

Lit signs have parts that wear out, and unlit signs mostly do not. In a lit sign, the power supply is usually the first component to fail. LED modules last much longer. One major module maker rates its channel letter modules above 60,000 hours and backs them with a 10-year warranty, though real-world life depends on heat, moisture, and power quality.

Non-illuminated letters need little beyond cleaning and an occasional check of fasteners, though painted finishes and vinyl graphics still fade over years of Colorado sun. Our guide to sign materials in Colorado compares how each material ages.

APG provides repair and maintenance services for signs we originally produced. If an APG sign is damaged, has an electrical issue, or needs an approved face replacement, send us a photo and the project information so our team can review it.

09/9Section

A simple way to decide

Answer four questions:

  1. Are customers looking for you after dark, including winter evenings? If yes, lean illuminated.
  2. Is the sign read from a fast road or from far away? If yes, lean illuminated.
  3. Does the facade go dark at night? If yes, lean illuminated or add external lighting.
  4. Is the budget or timeline tight, and are visitors mostly by appointment? If yes, lean non-illuminated.

Two or more yes answers to the first three usually point to a lit sign. If you are still unsure, halo-lit letters or a non-illuminated sign designed with room to add lighting later are reasonable middle paths. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process, including a mockup on a photo of your building.

Key Takeaways

The Short Version

  • Light the sign if customers look for you after dark, the road is fast, or the facade goes dark at night.
  • APG's typical ranges are $8,000 to $15,000 for illuminated commercial signs and $2,500 to $10,000 for non-illuminated ones.
  • Illuminated signs typically take four to eight weeks; vinyl and non-illuminated signs one to two weeks.
  • Lit signs need UL listing, a licensed electrical connection, and a sign contractor licensed for electric signs.
  • LED energy cost is watts times hours times your rate; a timer or photocell keeps it low.
  • Power supplies are usually the first part of a lit sign to fail; unlit signs need little beyond cleaning.
  • These ranges are typical and are not project specific estimates.
Sources and references

Where this information comes from

  1. City of Colorado Springs sign applications: coloradosprings.gov.
  2. Pikes Peak Regional Building Department, license types: pprbd.org.
  3. International Sign Association, Colorado Springs EMC expansion (2026): signs.org.
  4. SloanLED Prism channel letter module brochure (life rating and warranty): sloanled.com.
  5. IAEI Magazine, inspection basics for electrical signs (NEC 600.3 listing): iaeimagazine.org.
  6. APG published typical sign ranges and timelines, Colorado Springs.

Common questions

Illuminated vs Non-Illuminated FAQ

Do I need an illuminated sign for my business?

You likely do if customers look for you after dark, you face a fast or busy road, or your facade goes dark at night. Daytime, appointment-based businesses often do well with non-illuminated dimensional letters.

How much more does an illuminated sign cost?

APG's published typical ranges are $8,000 to $15,000 for illuminated commercial signs and $2,500 to $10,000 for non-illuminated commercial signs. These ranges are typical and are not project specific estimates.

Does a lit sign need a separate permit?

In Colorado Springs, both lit and unlit permanent signs need a sign application. Lit signs also involve electrical work by a licensed electrical contractor and a sign contractor licensed for electric signs.

How long does an illuminated sign take?

Illuminated signs typically take four to eight weeks, with permit review usually the longest step. Vinyl and non-illuminated signs typically take one to two weeks.

How much electricity does an LED sign use?

Multiply the sign's rated watts by the hours it runs. A 200-watt sign running 12 hours a night uses about 876 kilowatt-hours a year. Multiply that by your electric rate for the cost.

What part of a lit sign fails first?

The power supply is usually the first component to fail. LED modules typically last much longer, and some carry 10-year manufacturer warranties.

What is a good middle option between lit and unlit signs?

Halo-lit letters, backlit flat cut letters, or dimensional letters with external lighting can all give some nighttime visibility. Their cost compared with front-lit channel letters depends on the design, so it is worth pricing more than one option.

Can I add lighting to a non-illuminated sign later?

Sometimes. External lighting can often be added later, but converting solid letters to internally lit letters usually means new letters. If you expect to add lighting, say so at the design stage.

Are temporary signs allowed to be lit in Colorado Springs?

No. Under the city sign code, temporary signs cannot be illuminated or animated.

APG: Advanced Printing and Graphics
APG: Advanced Printing and Graphics
Prepared by the APG Content Team · Colorado Springs, CO

APG: Advanced Printing and Graphics provides vehicle wraps, commercial signage, printing, apparel, promotional products, branding, and graphic design. APG is backed by industry experience dating to 2002 and has completed more than 3,000 projects and 1,000 installations. Our experience includes work for Colorado businesses and national brands such as Nike, Wells Fargo, Redken, and Warner Bros. APG was named a 2026 Best of the Springs winner in the design category by The Gazette and is a 2026 Best in Business finalist for outdoor marketing solutions with the Southern Colorado Business Journal.

Request a Free Estimate

Lit or unlit?

Get both options priced side by side.

Send photos of your building by day and, if you can, by night, plus your hours and logo files. Our team will price lit and unlit versions so you can compare. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.