Fleet Graphics Budgeting Planning Next Year's Wraps
A practical method for fleet managers to build next year's graphics budget from the vehicle list: new vehicles, wraps reaching the end of their life, removals at disposal, repairs, and a contingency, with a worksheet you can copy.

A fleet graphics budget is easiest to build from five lines: new vehicles joining the fleet, existing wraps reaching the end of their life, removals on vehicles being sold or returned, repairs, and a contingency. Count vehicles in each line, then apply typical ranges. In Colorado Springs, APG's published typical ranges are $3,500 to $6,500 for full car and van wraps, $1,500 to $3,500 for partial wraps, $350 to $900 for lettering, and $6,000 to $12,000 for box trucks and trailers, with fleet savings of about 10 percent at five or more vehicles and 15 to 20 percent at ten or more. Cast wraps typically need replacing every five to seven years. These ranges are typical and are not project specific estimates.
- Start with the vehicle list, not the price list
- The five budget lines
- Line 1: new vehicles
- Line 2: replacements on a 5 to 7 year cycle
- Line 3: removals at disposal
- Lines 4 and 5: repairs and contingency
- A simple budgeting worksheet
- Worked example: a 15-vehicle service fleet
- Timing the spend through the year
Fleet graphics rarely blow a budget because they are expensive. They blow it because nobody counted the vehicles coming and going.
Many fleets treat graphics as a one-time purchase, then get surprised every year by a new van that needs lettering, a sold truck that still has the company name on it, and a wrap that faded faster on the roof than anyone expected. All of that is predictable from the vehicle list and the age of the current graphics.
This guide gives fleet managers a simple method: five budget lines, a replacement schedule based on wrap life, typical ranges to apply, and a worksheet to fill in. For pricing by fleet size, see our fleet wrap pricing guide, and for how we run fleet work, our fleet wraps page. These ranges are typical and are not project specific estimates.
Start with the vehicle list, not the price list
Every fleet graphics budget starts with the same spreadsheet: one row per vehicle. For each one, record:
- Unit number, year, make, model, and configuration
- Current graphics: full wrap, partial, lettering, or none
- The year those graphics were installed, and the film if known
- Planned disposal or lease return date
- Whether it is garaged or parked outside
Then add a row for every vehicle you expect to buy or lease next year, which usually comes from the vehicle replacement plan. With that list, each vehicle falls into one of the budget lines below, and the budget is mostly counting.
The five budget lines
Almost every dollar of fleet graphics spending fits one of five lines:
- New vehicles. Every vehicle joining the fleet needs graphics. This is usually the biggest and most predictable line.
- Replacements. Existing wraps or lettering reaching the end of their service life on vehicles you are keeping.
- Removals at disposal. Graphics coming off vehicles being sold, traded, or returned at lease end.
- Repairs. Panels damaged by accidents, hail, or scrapes.
- Changes and contingency. New phone numbers, new services, hiring messages, mid-year additions, and the vehicle nobody told you about.
A full rebrand is a sixth, one-time line. If one is coming, our fleet rebranding cost guide covers it separately.
Line 1: new vehicles
Count the vehicles joining the fleet by type and coverage level, then apply typical ranges. APG's published typical ranges in Colorado Springs:
| Coverage | Typical range per vehicle |
|---|---|
| Full car and van wraps | $3,500 to $6,500 |
| Partial wraps | $1,500 to $3,500 |
| Vehicle lettering and door decals | $350 to $900 |
| Box trucks and trailers | $6,000 to $12,000 |
If the fleet already has a design standard and templates on file, new vehicles mostly reuse existing artwork, which keeps design time down. Vehicles that arrive in batches can be grouped into one order to reach the volume tiers. These ranges are typical and are not project specific estimates.
Line 2: replacements on a 5 to 7 year cycle
Wraps wear out on a schedule you can predict. Cast vinyl with laminate typically lasts five to seven years on a hand-washed vehicle in Colorado Springs, and longer on a garaged one. At 6,035 feet, UV is stronger than at sea level, so roofs and hoods usually show age first.
To build the replacement line:
- Flag every vehicle whose graphics will reach five years next year, and plan for those reaching seven.
- Move outdoor-parked vehicles and dark wraps earlier in the queue.
- Check whether each flagged vehicle is being kept. A vehicle being sold in 18 months may only need removal at disposal, not new graphics.
- Price replacements as removal plus new graphics. J.D. Power describes a replacement wrap as costing about the same as the original, often plus about $500 for removal on a typical vehicle.
Spreading replacements across quarters keeps the line steady and keeps one or two vehicles off the road at a time. Our guide to how long wraps last in Colorado Springs covers what shortens or extends wrap life.
Line 3: removals at disposal
Every vehicle leaving the fleet should leave without your name on it. A sold truck still carrying your logo and phone number keeps representing your company with someone else driving. Leased vehicles usually need to go back in factory condition.
Published 2026 removal ranges for full wraps run about $500 to $1,500 for cars, $700 to $2,000 for SUVs and pickups, $800 to $2,200 for cargo vans, and $1,200 to $3,500 for box trucks. Lettering and decals cost far less to remove. Our wrap removal cost guide covers the details, and our fleet de-identification page covers removal before sale. These ranges are typical and are not project specific estimates.
Schedule removals several weeks before the sale or lease return date, since wraps removed within their rated life usually come off faster and cost less to remove.
Lines 4 and 5: repairs and contingency
Repairs are harder to predict per vehicle but steady across a fleet. Accidents, backing incidents, and hail between roughly April and August all damage panels. When the original artwork and templates are on file, a damaged panel can often be reprinted and replaced instead of rewrapping the whole vehicle. For wraps, repairs and panel replacement are planned around APG's own installs and templates on file. Anything else is reviewed case by case. Our vehicle wrap repair page explains how panel replacement works.
The contingency line covers what nobody planned: a new phone number, a new service line, a "Now Hiring" message, or a vehicle added mid-year. A practical approach is to budget a small number of lettering jobs and a few panel repairs based on last year's experience. If you have no history, start with a modest allowance and adjust after one year.
A simple budgeting worksheet
Copy this into a spreadsheet and fill in your own counts. The ranges column uses the published figures above. Replace them with your own estimates once you have them.
| Line | Count | Typical range each | Low | High |
|---|---|---|---|---|
| New vans, full wrap | __ | $3,500 to $6,500 | count x low | count x high |
| New vehicles, partial | __ | $1,500 to $3,500 | count x low | count x high |
| New vehicles, lettering | __ | $350 to $900 | count x low | count x high |
| New box trucks or trailers | __ | $6,000 to $12,000 | count x low | count x high |
| Replacements | __ | New graphics plus removal | sum | sum |
| Removals at disposal | __ | $500 to $3,500 by vehicle | sum | sum |
| Repairs | __ | Based on last year | sum | sum |
| Fleet volume savings | About 10% at 5+, 15 to 20% at 10+ | minus | minus | |
| Contingency | Small allowance | add | add |
Volume savings apply to graphics ordered together, so grouping new vehicles and replacements into one or two orders a year can move the whole budget into a better tier. These ranges are typical and are not project specific estimates.
Worked example: a 15-vehicle service fleet
Here is the worksheet applied to a hypothetical fleet of 15 cargo vans and pickups. It is an illustration of the method, not a quote.
| Line | Math | Illustrative range |
|---|---|---|
| New vans, partial wraps | 3 at $1,500 to $3,500 | $4,500 to $10,500 |
| Replacement partials | 2 at $1,500 to $3,500 | $3,000 to $7,000 |
| Removal before replacement | 2 vans at $800 to $2,200 | $1,600 to $4,400 |
| Removal at disposal | 2 pickups at $700 to $2,000 | $1,400 to $4,000 |
| Volume savings | About 10% on 5 new and replacement wraps | minus $750 to $1,750 |
| Illustrative total before repairs and contingency | $9,750 to $24,150 | |
The biggest variables are coverage choice and the condition of the graphics coming off. If the departing pickups carry lettering instead of wraps, the disposal line drops sharply.
Timing the spend through the year
When graphics happen affects both cost and downtime:
- Order new-vehicle graphics before the vehicles arrive. With templates and artwork ready, a new van can go from delivery to branded in days instead of weeks.
- Avoid the spring rush. Spring is often a busy time for vehicle graphics, so replacements scheduled in late fall and winter may get more flexible install dates. Vinyl applied in the cold does not conform and does not adhere correctly, so APG installs indoors in a heated bay year round.
- Stage installs. One or two vehicles at a time keeps the fleet working.
- Talk to your accountant. Wraps are often treated as an advertising expense, and our guide on whether vehicle wraps are tax deductible covers the basics.
For an exact budget, send your vehicle list with graphics ages and planned additions and disposals. Our team will price each line. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process. Our guide to fleet wrap design rules covers keeping new vehicles consistent with the rest.
The Short Version
- Build the fleet graphics budget from the vehicle list, with one row per vehicle and its graphics age.
- Use five lines: new vehicles, replacements, removals at disposal, repairs, and contingency.
- Plan replacements on a five to seven year cycle for cast wraps, earlier for outdoor-parked vehicles.
- APG's typical ranges: $3,500 to $6,500 full, $1,500 to $3,500 partial, $350 to $900 lettering, $6,000 to $12,000 box trucks and trailers.
- Group orders to reach fleet savings of about 10 percent at five vehicles and 15 to 20 percent at ten or more.
- Budget removal for every vehicle being sold or returned.
- These ranges are typical and are not project specific estimates.
Where this information comes from
- J.D. Power, how much it costs to wrap a truck, including replacement and removal (2024): jdpower.com.
- Chicago Fleet Wraps, wrap removal pricing (2026): chicagofleetwraps.com.
- Craftsmen Industries, fleet graphics rebrand transition and phasing (2026): craftsmenind.com.
- APG published typical ranges and fleet volume tiers, Colorado Springs.
Common questions
Fleet Graphics Budget FAQ
How do I budget for fleet graphics?
To budget for fleet graphics, start with a vehicle list, then sort vehicles into five lines: new vehicles, replacements, removals at disposal, repairs, and contingency. Count each line and apply typical ranges. These ranges are typical and are not project specific estimates.
How often do fleet wraps need to be replaced?
Fleet wraps in cast vinyl with laminate typically last five to seven years on a hand-washed vehicle in Colorado Springs, longer if garaged. Outdoor-parked vehicles and roofs usually age first.
How much should I budget per new fleet vehicle?
APG's published typical ranges in Colorado Springs are $3,500 to $6,500 for full car and van wraps, $1,500 to $3,500 for partial wraps, $350 to $900 for lettering, and $6,000 to $12,000 for box trucks and trailers.
Should removal be in the fleet graphics budget?
Yes. Every vehicle being sold or returned at lease end should have graphics removed, and published full wrap removal ranges run about $500 to $3,500 per vehicle depending on size and film.
Do fleets get volume discounts on graphics?
Fleet orders typically save about 10 percent per vehicle at five or more vehicles and 15 to 20 percent at ten or more, so grouping new vehicles and replacements into fewer orders helps.
How much does replacing an old fleet wrap cost?
J.D. Power describes a replacement wrap as costing about the same as the original installation, often plus about $500 for removal on a typical vehicle. Older or economy film costs more to remove.
When is the best time of year to schedule fleet graphics?
Spring is often a busy season for vehicle graphics, so fleet replacements scheduled in late fall and winter may get more flexible install dates. APG installs indoors in a heated bay year round.
How do I budget for wrap repairs?
Budget wrap repairs from last year's damage history, and keep artwork and templates on file so damaged panels can be reprinted and replaced instead of rewrapping the vehicle.

APG: Advanced Printing and Graphics provides vehicle wraps, commercial signage, printing, apparel, promotional products, branding, and graphic design. APG is backed by industry experience dating to 2002 and has completed more than 3,000 projects and 1,000 installations. Our experience includes work for Colorado businesses and national brands such as Nike, Wells Fargo, Redken, and Warner Bros. APG was named a 2026 Best of the Springs winner in the design category by The Gazette and is a 2026 Best in Business finalist for outdoor marketing solutions with the Southern Colorado Business Journal.
Send the vehicle list
Get next year's budget priced.
Send your vehicle list with graphics ages, planned additions, and planned disposals. Our team will price each line of the budget and suggest how to group orders. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.