Downtown Colorado Springs Sign Rules
How downtown's Form-Based Code and the citywide sign code fit together, what the downtown design guidance says about blade signs, sidewalk A-frames, windows, and wall signs, and when a sign over the sidewalk needs a revocable permit.

Downtown Colorado Springs sign rules come from two places. The citywide sign code, now in Part 13 of the Unified Development Code as updated by Ordinance 26-01, still applies downtown, and most permanent signs need a sign permit. The Downtown Form-Based Code adds design guidance. Its 2017 published version suggests projecting signs up to 12 square feet with 11 feet of clearance and no more than 48 inches of projection, A-frames up to 6 square feet, and window signs up to 25 percent of the glass. A sign or A-frame over or on a public sidewalk generally also needs a revocable permit. Confirm current standards with the city before you design.
Downtown is where signs get closest to people: over the sidewalk, in the window, and at the front door. That is why the rules care about scale.
Downtown Colorado Springs is governed by the Downtown Form-Based Code, a zoning approach that focuses on how buildings relate to the street rather than what happens inside them. For signs, that means the citywide sign rules still set what is allowed and what needs a permit, while the Form-Based Code adds guidance aimed at a walkable, pedestrian-scale downtown.
This guide explains how those layers fit together, what the downtown guidance says about the sign types that matter most on a storefront, and where a revocable permit comes in. Some figures here come from the 2017 version of the Form-Based Code document and are labeled where used. Confirm the current version with the City before relying on any number. For the citywide permit process, see our guide to Colorado Springs sign permits after Ordinance 26-01.
Two rulebooks: citywide code and the Form-Based Code
Downtown signs are subject to the citywide sign code. The Downtown Form-Based Code itself says, in its section 2.9, that the City's sign standards and allocations remain applicable and are enforced throughout downtown. Under the current Unified Development Code, those citywide standards are in Part 13, updated by Sign Ordinance No. 26-01, which took effect July 1, 2026.
The Form-Based Code then adds downtown-specific design guidance in its section 4.4, covering sign types common on a walkable street: projecting signs, sidewalk signs, window signs, and wall signs. In practice:
- The citywide code decides whether a sign is allowed, whether it needs a permit, and what is prohibited everywhere.
- The Form-Based Code shapes how a sign should look and fit the building and the street in downtown.
- Your landlord's sign criteria may be stricter than both.
The 2017 Form-Based Code PDF refers to the sign code by its older chapter numbering, which is one more reason to confirm the current documents with City planning staff before design.
What needs a permit downtown
Downtown follows the citywide permit rules. Most new permanent signs need a sign application, and the sign plan is approved by Planning before the Building Official issues a permit. Common items that do not need a sign permit under Ordinance 26-01 include:
- Window signs up to 25 percent of the window area, not above the ground level
- Building plaques up to 6 square feet
- A-frame signs on private property that meet the citywide limits
- Interior signs not visible from outside
Electrical signs also need electrical work by a licensed contractor and a Pikes Peak Regional Building Department permit. Permit fees under the City's 2024 development review fee schedule are $200 plus $1 per square foot for permanent signs. Our sign permit services page explains how APG handles applications.
Projecting and blade signs
Projecting signs, often called blade signs, are the classic downtown sign: mounted perpendicular to the building so people walking down the sidewalk can see them. The Form-Based Code guidance favors them for pedestrian visibility.
The 2017 Form-Based Code document lists these guidelines for projecting signs:
| Item | 2017 FBC guidance |
|---|---|
| Maximum area | 12 square feet |
| Maximum width (thickness) | 1 foot |
| Minimum clearance above the sidewalk | 11 feet |
| Maximum projection | 48 inches |
| Number | One per tenant frontage at pedestrian level |
These figures are from that 2017 document. Confirm the current version and the citywide Part 13 limits before design. A projecting sign that hangs over a public sidewalk is in the City's airspace, so it generally also needs a revocable permit, covered below. Mounting a blade sign means anchoring into the facade, and some sign projects require engineered drawings based on the sign type, size, mounting method, and site conditions. We confirm the applicable requirements as part of the project review.
A-frames on the sidewalk
Sidewalk A-frame signs are common downtown, and the rules depend on whether the sign sits on private property or the public sidewalk.
- On private property, the citywide code allows A-frames without a permit: up to 4 feet by 2 feet, one per tenant or entrance, within 15 feet of the entrance, set back 4 feet, and out only during business hours.
- In the public right-of-way, including most downtown sidewalks, an A-frame needs a revocable permit from the City.
- The 2017 Form-Based Code guidance suggests A-frames up to 6 square feet, one per building, during business hours only, and kept out of the pedestrian way.
A December 2013 City handout for downtown sidewalk signs added practical conditions: property owner consent, one sign per business, placement in front of the business, removal at the end of each business day, and weighting the sign against wind. That handout is old, so treat it as background and confirm current terms. Our A-frame and sidewalk signs page covers sizes and materials, and our guide to temporary sign rules in Colorado Springs covers banners and other temporary signs.
Revocable permits for the public sidewalk
A revocable permit is the City's permission to use public right-of-way for a private purpose. The City describes surface permits, which can cover items like freestanding signs, and airspace permits, which can cover projecting signs. As the name says, the City can revoke the permit.
Points to expect for right-of-way use (confirm current requirements with the City):
- A structure or use generally must not occupy more than one-fifth of the width of a paved sidewalk.
- The application includes an applicant and owner acknowledgement, so the property owner is involved even when a tenant applies.
- Items must stay clear of bus stops. The City's temporary surface permit requirements call for a 20-foot setback from a posted bus stop.
Revocable permits are reviewed separately from the sign permit, so add time to your schedule. The City's Land Use Review staff handle these applications.
Window signs and wall signs
Window signs are one of the most useful downtown tools, and the limit is the same downtown as citywide: up to 25 percent of the window, not above the ground level, without a sign permit.
The 2017 Form-Based Code guidance adds that handwritten, paper, cardboard, and plastic window signs should not be used, and that glass doors are excluded from the window area calculation. Store hours and address numbers on a door are common and useful. Our guide to window graphics in Colorado Springs covers materials and the 25 percent cap.
For wall signs, the 2017 document suggests a guideline of half a square foot of sign per linear foot of business frontage, and notes that one sign per storefront or street-facing facade is usually enough. The citywide Part 13 allowances still set the legal limit. Our guide to wall sign permits in Colorado Springs covers those allowances.
Historic buildings downtown
Many downtown storefronts are in older buildings, and the Form-Based Code guidance asks signs to respect them. The 2017 document says historic signs should be retained when possible, that new signs should respect the size, scale, and design of historic buildings, and that signs should not hide significant historic features.
Practical effects:
- Sign bands above storefront windows are often the natural spot for a wall sign.
- Mounting into brick or stone should go into mortar joints where possible, so the facade is not damaged.
- Buildings with a historic designation may have additional review.
Our guide to sign rules in Old Colorado City and historic districts covers historic review in more detail.
Signs that are prohibited or limited
Downtown follows the citywide prohibitions, and the Form-Based Code adds a few downtown limits:
- Feather, wave, blade, and sword banners are prohibited citywide under Ordinance 26-01. Note that this refers to flag-style banners, not permanent blade signs mounted to a building.
- Temporary signs may not be illuminated or animated.
- Off-premise freestanding signs are prohibited in downtown sectors, according to the 2017 Form-Based Code.
- Roof signs and some illuminated sign types are listed in the 2017 document for case-by-case review.
Electronic message centers have their own citywide rules. Our guide to LED and electronic message center rules covers them.
How to plan a downtown sign
Downtown sign projects go more smoothly when the steps happen in the right order:
- Read your lease and landlord sign criteria. Our guide to reading landlord sign criteria explains what to look for. If a landlord requires a sign type we do not offer, we review the requirements and discuss the options with you.
- Photograph the storefront from across the street and down the sidewalk in both directions.
- Confirm current downtown guidance with City planning staff, since the published Form-Based Code PDF dates from 2017.
- Decide what goes where: wall sign for the street, blade sign for the sidewalk, window graphics for eye level. Our guide to where to put a sign on a building helps.
- Apply for the sign permit and any revocable permit together, so neither holds up the other.
Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.
The Short Version
- Downtown signs follow the citywide sign code in UDC Part 13, as updated by Ordinance 26-01, plus Downtown Form-Based Code guidance.
- The 2017 Form-Based Code suggests projecting signs up to 12 square feet, 11 feet of clearance, and 48 inches of projection; confirm the current version.
- A-frames on private property need no permit within citywide limits; on a public sidewalk they need a revocable permit.
- Signs or structures in the right-of-way must leave the sidewalk clear, generally using no more than one-fifth of its width.
- Window signs up to 25 percent of the window, at ground level, do not need a sign permit.
- Historic downtown buildings call for signs that respect the facade and keep historic features visible.
Where this information comes from
- City of Colorado Springs, Downtown Form-Based Code (published 2017 PDF, sections 2.9 and 4.4): downtowncs.com.
- City of Colorado Springs Unified Development Code, Part 13 signs (Ordinance 26-01): amlegal.com.
- City of Colorado Springs, sign application page: coloradosprings.gov.
- City of Colorado Springs, temporary surface revocable permit application requirements: coloradosprings.gov.
- Downtown Partnership, temporary signs in the right-of-way, City handout (December 2013): downtowncs.com.
Common questions
Downtown Sign Rules FAQ
What sign rules apply in downtown Colorado Springs?
The citywide sign code in Part 13 of the Unified Development Code, as updated by Ordinance 26-01, applies downtown. The Downtown Form-Based Code adds design guidance for projecting signs, sidewalk signs, window signs, and wall signs.
How big can a projecting sign be in downtown Colorado Springs?
The 2017 Downtown Form-Based Code document suggests a maximum of 12 square feet, 11 feet of clearance above the sidewalk, and no more than 48 inches of projection. Confirm the current version with the City before design.
Do I need a permit for a blade sign over the sidewalk downtown?
Generally, yes. A permanent projecting sign needs a sign permit, and a sign that hangs over a public sidewalk is in City airspace, which generally also requires a revocable permit.
Can I put an A-frame sign on a downtown sidewalk?
On a public sidewalk, an A-frame generally needs a revocable permit from the City. On private property, A-frames up to 4 by 2 feet near the entrance and out only during business hours do not need a permit.
What is a revocable permit in Colorado Springs?
It is the City's permission to use public right-of-way for a private purpose, such as a sign on or over a sidewalk. The City can revoke it, and the permitted use must leave the sidewalk clear for pedestrians.
How much of a downtown window can be covered with signs?
Window signs up to 25 percent of the window area, not above the ground level, do not need a sign permit under the citywide code. The same limit appears in the 2017 Form-Based Code guidance.
Does the Downtown Form-Based Code replace the city sign code?
No. The Form-Based Code states that the City's sign standards remain applicable and are enforced throughout downtown. It adds design guidance on top of them.
Are feather flags allowed downtown?
No. Feather, wave, blade, and sword banners are prohibited citywide under Ordinance 26-01, including downtown.
Are there special sign rules for historic downtown buildings?
The downtown guidance asks that historic signs be retained where possible and that new signs respect the scale of historic buildings and not hide significant historic features. Designated buildings may have additional review.

APG: Advanced Printing and Graphics provides vehicle wraps, commercial signage, printing, apparel, promotional products, branding, and graphic design. APG is backed by industry experience dating to 2002 and has completed more than 3,000 projects and 1,000 installations. Our experience includes work for Colorado businesses and national brands such as Nike, Wells Fargo, Redken, and Warner Bros. APG was named a 2026 Best of the Springs winner in the design category by The Gazette and is a 2026 Best in Business finalist for outdoor marketing solutions with the Southern Colorado Business Journal.
Downtown storefront?
Start with photos and your lease.
Send photos of your storefront from the street and sidewalk, plus your landlord's sign criteria. Our team will confirm what the code allows and which permits the project needs. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.