Colorado Springs sign company & vehicle wrap company
Mon-Fri 8:30-5:00 · By Appointment Only (719) 661-4470
APG: Advanced Printing and Graphics, Colorado Springs sign company
Checklist Published November 10, 2026 · 5 min read

Wrap Proof Checklist: What to Check Before You Approve

Once you approve a proof, it gets printed on every panel. Here is a step-by-step checklist for reviewing a vehicle wrap proof, from the phone number to the door handles, so mistakes are caught on screen instead of on the vehicle.

1Approved proof is what prints
4Views to check: both sides, front, rear
50 ftFederal legibility distance for USDOT markings
2-3 wkTypical estimate to finished vehicle
Quick Answer

A vehicle wrap proof is the scaled layout of your design on a template of your exact vehicle, and it is what gets printed once you approve it. Before approving, check every word and number: company name, phone, web address, license numbers, and any USDOT or other required markings. Then check colors against your brand, how text and logos fall across door handles, seams, body lines, fuel doors, and windows, and how the rear reads from behind. Confirm the vehicle year, make, model, and configuration on the proof, and approve one clearly labeled file version. At APG, once the estimate is approved and the deposit is received, our team will begin the design and proofing process.

A typo on a proof costs a few minutes. The same typo on a printed panel costs a reprint.

A wrap proof is your last chance to catch mistakes before film is printed, laminated, and cut. Once you approve it, the design moves into production, and anything on the proof, right or wrong, ends up on the vehicle. Most proof mistakes are simple: a transposed digit, an old phone number, a logo that lands on a door handle.

This checklist walks through what to check, in order. Print it, or keep it open next to the proof. For how proofs fit into the overall schedule, see our vehicle wrap timeline.

01/9Section

Before you start: what a proof is

A wrap proof shows your design on a scaled template of your exact vehicle, usually with views of the driver side, passenger side, front, rear, and sometimes the roof. It is a layout tool, not a photo. Colors on a screen are approximate, and small details such as rivets and trim may be simplified.

Once the estimate is approved and the deposit is received, our team will begin the design and proofing process. You receive proofs to review, request changes, and approve in writing. Each round of revisions can add a day or two, so a careful first review saves time.

Name one person to approve proofs. When several people send separate comments, changes conflict and rounds multiply.

02/9Section

1. Spelling and every word

Read every word on the proof slowly, out loud if it helps. Check:

  • Company name, exactly as registered or branded
  • Service lines and taglines
  • City or service area names
  • Any people's names or titles

Then have someone who did not write the content read it too. People who know what the text should say tend to read what they expect instead of what is there.

03/9Section

2. Phone number, web address, and contact details

Contact details are the most expensive mistake on a wrap, because they are why the wrap exists. Check them digit by digit against your records:

  • Phone number: correct area code, correct digits, and the number you want calls to go to. If you use a tracking number, make sure it is active and routes correctly.
  • Web address: spelled exactly, and type it into a browser to confirm it loads.
  • Address: if it is on the vehicle, confirm it, and consider whether it needs to be there at all.

Call the phone number on the proof before approving. It takes one minute.

04/9Section

3. License numbers and required markings

If your vehicle carries required markings, check them against your official records, not memory.

  • USDOT markings: where 49 CFR 390.21 applies, the legal or single trade name and the USDOT number, preceded by "USDOT," must appear on both sides of the vehicle, contrast sharply with the background, and be legible in daylight from 50 feet while the vehicle is stationary. Check that the name matches your registration and the number is correct.
  • License numbers: contractor, trade, or state license numbers, where your state or trade requires them.
  • Unit numbers: correct for this vehicle and consistent with the rest of the fleet.

If your vehicle is required to display a company name, USDOT number, or other commercial markings, we can include those items in the layout based on the information you provide. Our guide to USDOT number rules for Colorado work trucks explains who needs them.

05/9Section

4. Colors and the logo

Screens show color differently, so a proof viewed on a phone will not match the printed film exactly. Check color in a more reliable way:

  • Confirm your brand colors are specified, by Pantone or another color reference if you have one.
  • Compare against something already printed with your brand, such as a business card, sign, or another vehicle.
  • For fleets, ask how color will be matched to existing vehicles.

Check that the logo is the current version, not last year's, and that it has not been stretched or distorted to fit. Our guide to logo and artwork files explains why vector files matter.

06/9Section

5. Door handles, seams, and body lines

The vehicle's shape changes how a design reads. On each side view, look at where the important content lands relative to:

  • Door handles and locks: text, logos, and faces in photos should not land on them.
  • Door gaps and panel seams: a phone number split across a door gap is hard to read and breaks when the door opens.
  • Body lines and recesses: deep recesses can distort text that runs across them.
  • Fuel doors, sliding door tracks, and step plates
  • Ladder racks, toolboxes, and upfits that will cover part of the side once installed

Ask your designer to point out where seams and overlaps will fall. Our guide to fleet wrap design rules covers legibility.

07/9Section

6. Windows and the rear view

Check how the design handles glass. If side or rear windows are covered with perforated window film, the image will look less saturated on glass than on the body, and fine text on perforated film is hard to read. Keep phone numbers and small text off windows when possible.

Then look at the rear view as the driver behind you will. The rear doors carry handles, hinges, a center seam, license plate, lights, and windows. Check that:

  • The phone number or web address is large and not split by the center seam
  • Nothing important sits behind the license plate or light housings
  • The rear reads clearly from a car length or two away
08/9Section

7. The vehicle and the file version

Two details at the bottom of the proof matter more than they look:

  • The vehicle: confirm the year, make, model, wheelbase, roof height, and configuration match the vehicle being wrapped. A proof built on a standard-roof template will not fit a high-roof van.
  • The version: proofs are usually numbered or dated. Approve one specific version in writing, and make sure every requested change appears in it. Approving "the last one" by email after several rounds invites mix-ups.

If you approve a proof with an error, the cost of fixing it after printing may fall to you, so ask how your provider handles it. If anything is unclear, ask before approving.

09/9Section

The checklist to print

  1. Every word spelled correctly, read by a second person
  2. Phone number called and confirmed
  3. Web address typed and confirmed
  4. USDOT, license, and unit numbers checked against records
  5. Brand colors specified and logo current
  6. No key content on handles, seams, door gaps, or upfits
  7. Window content readable, or kept off glass
  8. Rear view readable from behind
  9. Vehicle year, make, model, and configuration correct
  10. One numbered proof version approved in writing

Our vehicle wrap design page explains how layouts are built.

Key Takeaways

The Short Version

  • A vehicle wrap proof is what gets printed once approved, so every mistake is cheapest to fix on the proof.
  • Call the phone number and type the web address before approving.
  • Check USDOT, license, and unit numbers against official records, not memory.
  • Look at where text lands on door handles, seams, body lines, windows, and upfits.
  • Check the rear view as the driver behind you will see it.
  • Confirm the vehicle configuration and approve one numbered proof version in writing.
  • At APG, design and proofing begin once the estimate is approved and the deposit is received.
Sources and references

Where this information comes from

  1. Federal motor carrier marking rules, 49 CFR 390.21: eCFR.
  2. Federal Motor Carrier Safety Administration: fmcsa.dot.gov.
  3. 3M Application: Vehicles Instruction Bulletin, window film guidance: 3m.com.
  4. APG vehicle wrap design and proofing records, Colorado Springs office.

Common questions

Wrap Proof FAQ

What is a vehicle wrap proof?

A vehicle wrap proof is a scaled layout of the design on a template of your exact vehicle, showing each side, the front, and the rear. Once approved, it is what gets printed.

What should I check on a vehicle wrap proof?

Check spelling, the phone number, web address, license and USDOT numbers, colors and logo version, where content lands on handles, seams, and windows, the rear view, the vehicle configuration, and the proof version number.

Will the colors on my proof match the printed wrap?

Not exactly. Screens display color differently, so compare against a printed sample of your brand or specify Pantone colors to get a closer match.

How many proof revisions are normal for a wrap?

It varies by project, but a careful first review keeps rounds down. Each round can add a day or two, and having one person approve proofs helps avoid conflicting changes.

Does design and proofing start before I pay a deposit?

At APG, once the estimate is approved and the deposit is received, the team begins the design and proofing process.

What happens if I approve a proof with a mistake?

The approved proof is what gets printed, so a mistake usually means reprinting the affected panel, and that cost may fall to the customer. Check carefully and ask questions before approving.

Should my phone number go on the rear windows?

It is usually better on the body. Perforated window film makes images less saturated and fine text hard to read, so keep phone numbers and small text off glass when possible.

How do I check the USDOT marking on a wrap proof?

Confirm the name matches your registration, the number is preceded by USDOT, it appears on both sides, contrasts sharply with the background, and is large enough to read in daylight from 50 feet.

APG: Advanced Printing and Graphics
APG: Advanced Printing and Graphics
Prepared by the APG Content Team · Colorado Springs, CO

APG: Advanced Printing and Graphics provides vehicle wraps, commercial signage, printing, apparel, promotional products, branding, and graphic design. APG is backed by industry experience dating to 2002 and has completed more than 3,000 projects and 1,000 installations. Our experience includes work for Colorado businesses and national brands such as Nike, Wells Fargo, Redken, and Warner Bros. APG was named a 2026 Best of the Springs winner in the design category by The Gazette and is a 2026 Best in Business finalist for outdoor marketing solutions with the Southern Colorado Business Journal.

Request a Free Estimate

Ready for a proof?

Start with an estimate.

Send the year, make, and model, photos of each side, your logo, and the content you want on the vehicle. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.