Colorado Springs sign company & vehicle wrap company
Mon-Fri 8:30-5:00 · By Appointment Only (719) 661-4470
APG: Advanced Printing and Graphics, Colorado Springs sign company
Rules Explained Published November 19, 2026 · 7 min read

Perforated Window Film on Rear Windows What Colorado Law Says

Perforated film turns a rear window into ad space while keeping it see-through from inside. Here is what the Colorado statutes on window treatments and mirrors say about rear glass, where the open questions are, and how to plan a rear window graphic sensibly.

27%General floor, glass other than windshield
70%Windshield and front side windows
200 ftRear view the mirror rule requires
2Exterior mirrors when rear view is blocked
Quick Answer

Colorado law generally treats perforated window film on rear window glass more loosely than film on the windshield or front side windows. Under C.R.S. 42-4-227, the windows behind the driver, including the rear window, may allow less than 27 percent light transmittance if the windshield and front side windows allow at least 70 percent, and no window may have a metallic or mirrored appearance. Under C.R.S. 42-4-226, a vehicle whose rear window is covered or made nontransparent must have an exterior mirror on each side. Most vans and trucks already do. This is general information, not legal advice; confirm your situation with law enforcement or an attorney.

The rear window is the most valuable unused ad space on most work vans. The law has more to say about it than most owners expect, and less than some installers claim.

Perforated window film, sometimes called one-way vision film, is printed vinyl with thousands of small holes. From outside, the eye reads the printed graphic. From inside, the driver looks through the holes, much like looking through a screen door. It is common on the rear windows of vans, SUVs, and pickups with a full wrap or partial wrap.

This guide summarizes what the Colorado statutes on window treatments and mirrors say, where the statutes are silent, and how to plan a rear window graphic that keeps visibility in mind. It is written by a graphics company, not a law firm. It is general information, not legal advice, and you should confirm your specific situation with law enforcement or an attorney. For the service side, see our window graphics and vehicle wraps pages.

01/9Section

The short version

Colorado's window treatment statute sets its strictest limits on the windshield and the front side windows, and allows more on the windows behind the driver. The mirror statute then requires two exterior side mirrors whenever the rear view through the back glass is blocked or the rear window is made nontransparent.

GlassWhat C.R.S. 42-4-227 says
WindshieldMust allow at least 70 percent light transmittance; a nontransparent strip is allowed only across the top, no more than 4 inches down, and not red or amber
Front side windowsNo less than 27 percent light transmittance under the general rule; must be at least 70 percent for the rear-window allowance to apply
Windows behind the driver, including the rear windowMay go below 27 percent if the windshield and front side windows allow at least 70 percent
Any windowNo material with a metallic or mirrored appearance

Statutes are amended over time, so check the current text before relying on any summary, including this one.

02/9Section

What C.R.S. 42-4-227 says about rear windows

Section 42-4-227 is Colorado's window tinting and treatment statute. Its general rule says that windows other than the windshield cannot be covered or treated with material that presents an opaque, nontransparent, metallic, or mirrored appearance in a way that allows less than 27 percent light transmittance.

The rear window allowance comes right after. The windows to the rear of the driver, including the rear window, "may allow less than twenty-seven percent light transmittance" when the front side windows and windshield each allow at least 70 percent. That is the provision most relevant to rear window graphics. It covers the back glass and the rear side windows, not the front door glass.

Two other provisions matter for graphics. The statute separately says no material may be used on any window that presents a metallic or mirrored appearance, so chrome-look or mirror-finish films on glass are a problem regardless of where they go. And it allows certificates or papers required by law to be displayed if they do not obstruct the driver's view.

03/9Section

What C.R.S. 42-4-226 says about mirrors

Section 42-4-226 is the mirror statute. Every motor vehicle needs a mirror or mirrors giving the driver a clear view of the road at least 200 feet to the rear.

When a vehicle has no rear window, or the rear window is obstructed or made nontransparent, the statute requires "an exterior mirror on each side" positioned to meet that 200 foot standard. The same rule applies when a load or a towed vehicle blocks the rear view.

In practice, this is the provision people mean when they say rear window graphics are fine as long as you have two side mirrors. Nearly every van, pickup, and SUV sold today has a driver side and passenger side exterior mirror from the factory. The point to check is that both are present, intact, and adjusted, especially on older trucks or vehicles with aftermarket mirrors.

04/9Section

Where the statutes are silent

The Colorado window statute does not mention perforated film by name. It talks about light transmittance and appearance, not hole patterns or open area. That leaves a few questions the text does not answer directly:

  • How light transmittance is measured through perforated film. The film is a pattern of solid vinyl and open holes, so a meter reading depends on how it is taken.
  • Whether a given officer views perforated film as obstructing the rear view. Another statute, C.R.S. 42-4-201, also addresses obstructed views and glass, so enforcement can involve more than one section.
  • How the rules apply to commercial motor vehicles. For vehicles covered by federal rules, 49 CFR 393.60 limits tinting on the windshield and the windows immediately to the driver's left and right, and says the transmittance restriction does not apply to other windows on the vehicle.

Because the statutes are silent on these points, we do not tell customers a particular film is "legal." If you need certainty for your vehicle, ask law enforcement or an attorney before installing.

05/9Section

How perforated film works

Perforated window film is a printable vinyl with a pattern of small holes and a dark adhesive side. The printed side faces out. Because the inside surface is dark and the outside is bright, the eye sees the graphic from outside and looks past it from inside.

Films are sold by ratio of printed area to open area. Common ratios are 50/50, 60/40, and 70/30. A higher printed percentage makes the graphic look more solid from outside but leaves less open area to see through. For rear windows, many installers lean toward 50/50 or 60/40 for visibility.

Perforated films are usually covered with an optically clear laminate made for that purpose. 3M, for example, describes its clear overlaminate as helping keep moisture and debris out of the perforation holes, which is a big part of how the graphic holds up.

06/9Section

Visibility in real driving

Even when allowed, perforated film reduces what the driver sees through the rear glass. Visibility is noticeably worse in rain, when water fills the holes, and at night, when the light balance between inside and outside flips. A few practical choices help:

  • Keep two good side mirrors. This is what the mirror statute centers on, and it is what drivers actually use.
  • Use a rear camera if the vehicle has one. Keep the film clear of the camera lens if it sits on or near the glass.
  • Leave the third brake light uncovered when it is mounted on or behind the glass, and keep the rear wiper path in mind.
  • Choose a ratio with more open area for vehicles that do a lot of night or highway driving.

Simple, high-contrast messages such as a phone number suit rear glass best, since fine detail breaks up on perforated film.

07/9Section

Front side windows and windshields are different

The rear window allowance does not extend to the driver and front passenger windows or the windshield. The windshield must allow at least 70 percent light transmittance, with only a narrow nontransparent strip across the top allowed. The front side windows must meet at least 70 percent for the rear-window allowance to apply at all.

That is why perforated graphics on vans usually stop at the rear doors and rear side glass, and the front doors carry graphics on the painted panel below the window. Graphics on front door glass create visibility and compliance problems.

08/9Section

How perforated film lasts in Colorado Springs

Perforated film generally has a shorter service life than solid vinyl on painted panels, because every hole collects dirt and moisture and the film works hard on curved, heated glass. At 6,035 feet, UV is stronger than at sea level, which speeds fading. Rear wipers, ice scrapers, and winter road film also wear rear window graphics faster than body panels.

Plan on replacing rear window graphics before the rest of a wrap, and avoid scraping ice off film. Our guide to how long vehicle wraps last in Colorado Springs covers lifespans by surface, and our guide to vehicle lettering and decal pricing covers perforated rear window film as part of a lettering package.

09/9Section

Planning a rear window graphic

When you request an estimate, mention which windows you want covered, whether the vehicle has a rear camera or wiper, and the ratio you prefer. If your vehicles are required to display a company name, USDOT number, or other commercial markings, we can include those items in the layout based on the information you provide, though required markings usually belong on the body panels, not the glass.

Once the estimate is approved and the deposit is received, our team will begin the design and proofing process. The proof will show the rear glass layout on a template of your vehicle so you can judge how the message reads before anything prints. For the legal question, confirm with law enforcement or an attorney.

Key Takeaways

The Short Version

  • C.R.S. 42-4-227 lets windows behind the driver, including the rear window, go below 27 percent light transmittance when the windshield and front side windows allow at least 70 percent.
  • C.R.S. 42-4-226 requires an exterior mirror on each side when the rear window is covered or the rear view is blocked.
  • No window may carry material with a metallic or mirrored appearance.
  • The statutes do not mention perforated film by name, so confirm your situation with law enforcement or an attorney.
  • Perforated film reduces visibility in rain and at night; 50/50 or 60/40 ratios leave more open area.
  • Keep film off the windshield and front side windows, the third brake light, and any rear camera lens.
Sources and references

Where this information comes from

  1. Colorado Revised Statutes 42-4-227, windows tinted or treated: law.justia.com (newer versions may exist; check the current text).
  2. Colorado Revised Statutes 42-4-226, mirrors and exterior placements: colorado.public.law.
  3. Colorado Revised Statutes 42-4-201, obstruction of view or driving mechanism: colorado.public.law.
  4. Federal Motor Carrier Safety Regulations, 49 CFR 393.60, glazing in specified openings: eCFR.
  5. 3M Scotchcal Optically Clear Overlaminate 8914 for perforated window graphic films: 3m.com.

Common questions

Rear Window Perforated Film FAQ

Is perforated window film on a rear window legal in Colorado?

Colorado's window statute, C.R.S. 42-4-227, allows windows behind the driver, including the rear window, to go below 27 percent light transmittance if the windshield and front side windows allow at least 70 percent. It does not mention perforated film by name, so confirm your situation with law enforcement or an attorney.

Do I need two side mirrors if my rear window has graphics?

Under C.R.S. 42-4-226, a vehicle whose rear window is covered, made nontransparent, or otherwise blocked from the driver's rear view must have an exterior mirror on each side that gives a view at least 200 feet to the rear.

Can I put perforated film on my front side windows in Colorado?

Perforated film on front side windows is generally avoided in Colorado. The rear window allowance in C.R.S. 42-4-227 does not cover the front side windows, which must allow at least 27 percent light transmittance under the general rule and at least 70 percent if the windows behind the driver go below 27 percent.

Are mirrored or chrome films allowed on vehicle windows in Colorado?

No. C.R.S. 42-4-227 says no material may be used on any vehicle window that presents a metallic or mirrored appearance.

What perforation ratio is best for a rear window?

Common perforation ratios are 50/50, 60/40, and 70/30 printed to open area. For rear windows, 50/50 or 60/40 leave more open area for visibility, while 70/30 makes the graphic look more solid from outside.

Can you see out of perforated window film at night?

Visibility through perforated film drops at night and in rain, when water fills the holes. Good side mirrors and a rear camera help, and simple, high-contrast graphics suit rear glass best.

Should perforated film cover the third brake light?

No. Keep perforated film off the third brake light when it is mounted on or behind the rear glass, and clear of any rear camera lens.

How long does perforated window film last on a vehicle?

Perforated film generally lasts less time than solid vinyl on painted panels, because the holes collect dirt and moisture and the glass takes wiper and scraper wear. Plan to replace it before the rest of the wrap.

Do commercial vehicles have different window film rules?

Vehicles covered by federal motor carrier rules also fall under 49 CFR 393.60, which limits tinting on the windshield and the windows immediately left and right of the driver and says the restriction does not apply to other windows. Colorado law also applies.

APG: Advanced Printing and Graphics
APG: Advanced Printing and Graphics
Prepared by the APG Content Team · Colorado Springs, CO

APG: Advanced Printing and Graphics provides vehicle wraps, commercial signage, printing, apparel, promotional products, branding, and graphic design. APG is backed by industry experience dating to 2002 and has completed more than 3,000 projects and 1,000 installations. Our experience includes work for Colorado businesses and national brands such as Nike, Wells Fargo, Redken, and Warner Bros. APG was named a 2026 Best of the Springs winner in the design category by The Gazette and is a 2026 Best in Business finalist for outdoor marketing solutions with the Southern Colorado Business Journal.

Request a Free Estimate

Rear glass doing nothing?

Put it to work. Keep the view.

Send the year, make, and model, photos of the rear of the vehicle, and what you want the back glass to say. Our team will send an estimate that names the film, the ratio, and the laminate. Once the estimate is approved and the deposit is received, our team will begin the design and proofing process.